| View previous topic :: View next topic |
| Author |
Message |
3ddd
Joined: 22 Dec 2004
Posts: 17
|
 Posted: Tue Jan 04, 2005 6:56 pm Post subject: Model number on gray Hauppauge remotes |
 |
|
This is the remote that my 250 (model 980) came with. I think it is not the remote that lirc is setup to use by default. I was wondering if anyone knew the model number of it.
Correct me if I am wrong, but I believe this is the traditional "gray" remote that KnoppMyth supports by default:
 |
|
| Back to top |
|
 |
Xsecrets
Joined: 06 Oct 2003
Posts: 4978
Location: Nashville, TN
|
| Posted: Tue Jan 04, 2005 7:32 pm Post subject: |
|
|
you are correct the one with the mediaMVP is the one knoppmyth is setup to work with by default. I have no idea what the model number is on the new ones or what it takes to make them work, but I guess this is just proof that hauppage has gone and changed something else on us.
_________________
Have a question search the forum and have a look at the KnoppMythWiki.
Xsecrets |
|
| Back to top |
|
|
tjc
Joined: 25 Mar 2004
Posts: 9117
Location: Arlington, MA
|
| Posted: Tue Jan 04, 2005 8:36 pm Post subject: |
|
|
Yep, the top one sure as heck looks different than the one that came with my older PVR-250!
However I thought someone had posted a set of bindings that worked with it...
Maybe this thread? http://mysettopbox.tv/phpBB2/viewtopic.php?t=3092 |
|
| Back to top |
|
|
3ddd
Joined: 22 Dec 2004
Posts: 17
|
| Posted: Wed Jan 05, 2005 6:15 am Post subject: |
|
|
| I read that thread but I wasn't sure what remote they were referring to - that's why i posted the pictures (I know Hauppauge used to make a black remote and they later switched to a gray one). So I guess it sounds like that thread is talking about my remote. |
|
| Back to top |
|
|
mccoyn
Joined: 05 Dec 2004
Posts: 83
Location: Michigan, USA
|
| Posted: Wed Jan 05, 2005 8:42 am Post subject: |
|
|
It looks like I have the same remote as you 3ddd. Now I know that it is indeed a different remote than the default configuration. I saw that other thread before the holidays, but I missed the puch line as I was gone for a week when the solution was posted. I'll have to work on this tonight.
I like everything my Hauppauge card can do, I just wish I could get it to do it all. |
|
| Back to top |
|
|
Jis
Joined: 22 Dec 2004
Posts: 17
Location: Holland
|
|
| Back to top |
|
|
Howski
Joined: 05 Apr 2004
Posts: 29
|
| Posted: Tue Jan 25, 2005 5:43 pm Post subject: |
|
|
I , too, have this remote. I like the key layout a LOT better than the old Hauppauge grey remote, so I am desperate to get it to work. So far I have modified /etc/lircd.conf and /home/mythtv/.mythtv/lircrc as directed for this remote, but still no joy. Am I missing a critical file location?
Thanks in advance,
_________________
-Howski
-------------------
Knoppmyth R5A16
Soyo Dragon KT400 Black Edition
Athlon XP 2400+ (2001MHz)
512MB SDRAM
nVidia GeForce4 5200 64MB
Hauppauge WinTV-PVR350
Hauppauge WinTV-PVR250 |
|
| Back to top |
|
|
tjc
Joined: 25 Mar 2004
Posts: 9117
Location: Arlington, MA
|
| Posted: Tue Jan 25, 2005 7:14 pm Post subject: |
|
|
| Have you checked the log files to make sure the daemon likes the syntax of the config files? There is a mention further down the thread of some corruption that you may have been bitten by... |
|
| Back to top |
|
|
Russ
Joined: 21 Jan 2005
Posts: 124
Location: New York
|
| Posted: Wed Jan 26, 2005 7:49 am Post subject: |
|
|
I also have the A415-HPG "silver" remote. Follow the steps in the wiki and you should be in good shape:
http://knoppmythwiki.homelinux.org/index.php?page=Hauppauge250Remote
Since the silver remote has a substantially different button layout than the grey one, you'll probably want to tweak your /home/mythtv/.mythtv/lircrc file to your liking.
I'll post my /etc/lircd.conf and /home/mythtv/.mythtv/lircrc files this evening which you can use as a starting point.
-Russ |
|
| Back to top |
|
|
Russ
Joined: 21 Jan 2005
Posts: 124
Location: New York
|
| Posted: Thu Jan 27, 2005 6:23 pm Post subject: lirc config files for Hauppauge Silver remote |
|
|
Here are the lirc config files for the Hauppauge Silver remote model number A415-HPG:
/etc/lircd.conf
| Code: |
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand: Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
#
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
TV 0x000000000000179C
Videos 0x0000000000001798
Music 0x0000000000001799
Pictures 0x000000000000179A
Guide 0x000000000000179B
Radio 0x000000000000178C
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
OK 0x00000000000017A5
Back/Exit 0x000000000000179F
Menu/i 0x000000000000178D
Vol+ 0x0000000000001790
Vol- 0x0000000000001791
Prev.Ch 0x0000000000001792
Mute 0x000000000000178F
Ch+ 0x00000000000017A0
Ch- 0x00000000000017A1
Record 0x00000000000017B7
Stop 0x00000000000017B6
Rewind 0x00000000000017B2
Play 0x00000000000017B5
Forward 0x00000000000017B4
Replay/SkipBackward 0x00000000000017A4
Pause 0x00000000000017B0
SkipForward 0x000000000000179E
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Asterix 0x000000000000178A
0 0x0000000000001780
# 0x000000000000178E
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
end codes
end remote
|
/home/mythtv/.mythtv/lircrc
| Code: |
# lircrc.example.HauppaugeSilver-nativelirc
# 2005-01-27, Russell Salerno
# mailto:rsalern5@optonline.net
# Save this file in ~/.mythtv/lircrc
begin
prog = mythtv
button = Off
config = Esc
end
begin
prog = mythtv
button = Go
# Swap the PiP windows
config = N
end
begin
prog = mythtv
button = 1
config = 1
end
begin
prog = mythtv
button = 2
config = 2
end
begin
prog = mythtv
button = 3
config = 3
end
begin
prog = mythtv
button = 4
config = 4
end
begin
prog = mythtv
button = 5
config = 5
end
begin
prog = mythtv
button = 6
config = 6
end
begin
prog = mythtv
button = 7
config = 7
end
begin
prog = mythtv
button = 8
config = 8
end
begin
prog = mythtv
button = 9
config = 9
end
begin
prog = mythtv
button = Back/Exit
config = Esc
end
begin
prog = mythtv
button = 0
config = 0
end
begin
prog = mythtv
button = menu/i
config = M
end
# Below are keys used with the Hauppauge Silver remote
begin
prog = mythtv
# This is the Red key
# We'll use it for "Delete"
button = Red
config = D
end
begin
prog = mythtv
# This is the Green key
# We'll use it for "Information"
button = Green
config = I
end
begin
prog = mythtv
# This is the Blue key
# Use it for the sleep timer
button = Blue
config = F8
end
begin
prog = mythtv
# This is the Yellow key
# adjust video
button = Yellow
config = F
end
# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed. This depends on your system, so you may want to increase or
# decrease this and see what happens. repeat = 1 is probably too
# fast.
begin
prog = mythtv
button = vol-
repeat = 3
config = F10
end
begin
prog = mythtv
button = vol+
repeat = 3
config = F11
end
begin
prog = mythtv
button = Ch+
config = Up
end
begin
prog = mythtv
button = Ch-
repeat = 3
config = Down
end
begin
prog = mythtv
button = Up
# This is the "up" on the central diamond
repeat = 3
config = Up
end
begin
prog = mythtv
button = Down
# This is the "down" on the central diamond
repeat = 3
config = Down
end
begin
prog = mythtv
# button = Vol-
button = Left
# This is the "left" on the central diamond
repeat = 3
config = Left
end
begin
prog = mythtv
# button = Vol+
button = Right
# This is the "right" on the central diamond
repeat = 3
config = Right
end
begin
prog = mythtv
# Middle button on the diamond
button = Ok
config = Return
end
begin
prog = mythtv
button = Mute
config = F9
end
begin
prog = mythtv
# Change focus for PiP (to change channel in the other window)
button = Blank
config = B
end
begin
prog = mythtv
# Toggle PiP on/off
button = Full
config = V
end
begin
prog = mythtv
button = Rew
config = Left
end
begin
prog = mythtv
button = Play
config = P
end
begin
prog = mythtv
button = FFW
config = Right
end
begin
prog = mythtv
button = Record
config = R
end
begin
prog = mythtv
# Teletext
button = Stop
config = T
end
begin
prog = mythtv
button = pause
config = P
end
begin
prog = mythtv
button = Replay
# Use for backwards commercial skip
config = Q
end
begin
prog = mythtv
button = Skip
# Use for forward commercial skip
config = Z
end
#MPlayer
begin
prog = mplayer
button = Off
config = quit
end
begin
prog = mplayer
button = MENU
config = osd
end
begin
prog = mplayer
button = Rew
config = seek -10
repeat = 1
end
begin
prog = mplayer
button = FFW
config = seek +10
repeat = 1
end
begin
prog = mplayer
button = Replay
config = seek -60
repeat = 1
end
begin
prog = mplayer
button = Skip
config = seek +60
repeat = 1
end
begin
prog = mplayer
button = Pause
config = pause
end
begin
prog = mplayer
button = Play
config = pause
end
begin
prog = mplayer
button = BACK
config = quit
end
begin
prog = mplayer
button = VOL+
config = volume +1
repeat = 1
end
begin
prog = mplayer
button = VOL-
config = volume -1
repeat = 1
end
begin
prog=mplayer
button=Mute
config=mute
end
|
|
|
| Back to top |
|
|
bryzmon
Joined: 25 Jan 2005
Posts: 6
Location: Costa Mesa, California
|
| Posted: Fri Jan 28, 2005 9:09 am Post subject: Re: lirc config files for Hauppauge Silver remote |
|
|
| Russ wrote: | Here are the lirc config files for the Hauppauge Silver remote model number A415-HPG:
|
Thanks Russ, this works for me -new PVR250 silver remote, model number A415-HPG. Elsewhere in the WIKI only the /etc/lircd.conf is mentioned, editing the /.mythtv/lircrc seems to be the final step.
Some buttons seem to do nothing (GO, HOME), but I am still exploring these. |
|
| Back to top |
|
|
Howski
Joined: 05 Apr 2004
Posts: 29
|
| Posted: Tue Feb 01, 2005 12:41 pm Post subject: |
|
|
OW! Russ, you rule. I didn't know the WIKI had been updated yet with that info. Thanks, I am looking forward to giving that a shot when I get home!
_________________
-Howski
-------------------
Knoppmyth R5A16
Soyo Dragon KT400 Black Edition
Athlon XP 2400+ (2001MHz)
512MB SDRAM
nVidia GeForce4 5200 64MB
Hauppauge WinTV-PVR350
Hauppauge WinTV-PVR250 |
|
| Back to top |
|
|
Escher0
Joined: 25 Nov 2004
Posts: 75
|
| Posted: Wed Feb 02, 2005 1:05 am Post subject: |
|
|
I used another file as a base and edited it to use almost all of the buttons (not done playing yet) and fixed a few things. Some of the things I fixed were volume, previous channel, fast foward/rewind and some other things I don't remember. This isn't perfect, but it's working great for me. Oh and I have no idea if the mplayer config works as I haven't sat down to get mplayer working on my box yet but I did add in the volume control there.
Just an alternative if you want it...
| Code: | # ~/.mythtv/lircrc
#
# MythTV native LIRC config file for
# the grey Hauppauge remote
#
# By Jarod Wilson, 2003/12/21
# Amalgamated from Jeff Campbell's,
# .lircrc, the mythtv.org docs, and
# a few touches of my own. :)
#
# Additional commands and fixes
# by Brian Pilnick 2005/1/15
#
# Channel Up
begin
prog = mythtv
button = Channel-UP
repeat = 3
config = Up
end
# Channel Down
begin
prog = mythtv
button = Channel-DOWN
repeat = 3
config = Down
end
# Volume Up
begin
prog = mythtv
button = Volume-UP
repeat = 3
config = ]
end
# Volume Down
begin
prog = mythtv
button = Volume-DOWN
repeat = 3
config = [
end
# OK/Select
begin
prog = mythtv
button = OK
config = Space
end
# Play
begin
prog = mythtv
button = Play
config = Return
end
# Stop
begin
prog = mythtv
button = Stop
config = Esc
end
# Escape/Exit/Back
begin
prog = mythtv
button = Back-Exit
config = Esc
end
# Power Off/Exit
begin
prog = mythtv
button = Power
config = Esc
end
# Red means stop!
#begin
#prog = mythtv
#button = red
#config = Esc
#end
# Pause
begin
prog = mythtv
button = Pause
repeat = 3
config = P
end
# Mute
begin
prog = mythtv
button = Mute
repeat = 3
config = F9
end
begin
prog = mythtv
button = UP
repeat = 3
config = Up
end
begin
prog = mythtv
button = RIGHT
repeat = 3
config = Right
end
begin
prog = mythtv
button = DOWN
repeat = 3
config = Down
end
begin
prog = mythtv
button = LEFT
repeat = 3
config = Left
end
# Rewind
# Scroll EPG Left one page
begin
prog = mythtv
button = Rewind
repeat = 3
config = <
end
# Fast forward
# Scroll EPG right one page
begin
prog = mythtv
button = Forward
repeat = 3
config = >
end
# Skip forward (10 min default)
# Scroll EPG down one page
begin
prog = mythtv
button = Next
repeat = 3
config = PgDown
end
# Skip backward (10 min default)
# Scroll EPG up one page
begin
prog = mythtv
button = Previous
repeat = 3
config = PgUp
end
# Record
begin
prog = mythtv
button = Record
repeat = 3
config = R
end
# Delete
begin
prog = mythtv
button = red
repeat = 3
config = D
end
# Previous Channel
begin
prog = mythtv
button = Prev-Channel
repeat = 3
config = H
end
# OSD browse (allows channel scrolling from OSD while keeping current channel)
# While watching a recording, brings up Options
begin
prog = mythtv
button = green
repeat = 3
config = O
end
# Display EPG while in live TV,
# View selected show while in EPG
# While in a recording, enters editing mode
begin
prog = mythtv
button = Menu
repeat = 3
config = M
end
# Display EPG while in live TV,
# View selected show while in EPG
# While in a recording, enters editing mode
begin
prog = mythtv
button = Guide
repeat = 3
config = M
end
# Bring up OSD info
# In EPG or recordings menu, brings up show info and recording options
begin
prog = mythtv
button = Go
repeat = 3
config = I
end
# Change display aspect ratio
#begin
#prog = mythtv
#button = FULL
#repeat = 3
#config = W
#end
# Move EPG back one day
# Seek to previous commercial cut point
begin
prog = mythtv
button = yellow
repeat = 3
config = Home
end
# Move EPG foward one day
# Seek to next commercial cut point
begin
prog = mythtv
button = blue
repeat = 3
config = End
end
# Numbers 0-9
begin
prog = mythtv
button = 0
repeat = 3
config = 0
end
begin
prog = mythtv
button = 1
repeat = 3
config = 1
end
begin
prog = mythtv
button = 2
repeat = 3
config = 2
end
begin
prog = mythtv
button = 3
repeat = 3
config = 3
end
begin
prog = mythtv
button = 4
repeat = 3
config = 4
end
begin
prog = mythtv
button = 5
repeat = 3
config = 5
end
begin
prog = mythtv
button = 6
repeat = 3
config = 6
end
begin
prog = mythtv
button = 7
repeat = 3
config = 7
end
begin
prog = mythtv
button = 8
repeat = 3
config = 8
end
begin
prog = mythtv
button = 9
repeat = 3
config = 9
end
### MPlayer lirc setup
# Mplayer Volume Up
begin
prog = mplayer
button = Volume-UP
repeat = 1
config = volume 1
end
# Mplayer Volume Down
begin
prog = mplayer
button = Volume-DOWN
repeat = 1
config = volume -1
end
# Show OSD
begin
prog = mplayer
button = Menu
repeat = 3
config = osd
end
# Pause playback
begin
prog = mplayer
button = Pause
repeat = 3
config = pause
end
# Skip ahead a minute if playing
# If paused, resume playing
begin
prog = mplayer
button = Play
repeat = 3
config = seek +1
end
# Stop playback and exit
begin
prog = mplayer
button = Stop
repeat = 3
config = quit
end
# Mute
begin
prog = mplayer
button = Mute
repeat = 3
config = mute
end
# Seek back 10 seconds
begin
prog = mplayer
button = Rewind
repeat = 3
config = seek -10
end
# Seek forward 30 seconds
begin
prog = mplayer
button = Forward
repeat = 3
config = seek +30
end
# Quit
begin
prog = mplayer
button = Back-Exit
repeat = 3
config = quit
end
# Seek forward 10 minutes
begin
prog = mplayer
button = Next
repeat = 3
config = seek +600
end
# Seek backward 10 minutes
begin
prog = mplayer
button = Previous
repeat = 3
config = seek -600
end
# Toggle full-screen
#begin
#prog = mplayer
#button = FULL
#repeat = 3
#config = vo_fullscreen
#end
|
|
|
| Back to top |
|
|
frustrated
Joined: 07 Jan 2004
Posts: 116
|
| Posted: Fri Mar 25, 2005 3:34 pm Post subject: |
|
|
I have the A415-HPG remote and the older grey remotes. I followed the directions on the wiki:
1. ran install-i686-l then rebooted
2. copied in the new /etc/lircd.conf
3. copied in the new /home/mythtv/.mythtv/lircrc (I tried both lircrc's suggested in this post - I changed the owner and group to mythtv just in case)
But nothing happens 
Is there a log I can take a look at or any way of telling what the problem is? Thanks in advance. |
|
| Back to top |
|
|
Xsecrets
Joined: 06 Oct 2003
Posts: 4978
Location: Nashville, TN
|
| Posted: Fri Mar 25, 2005 4:03 pm Post subject: |
|
|
If you are using one of the R5 alphas then lircd doesn't load on boot by default. there are several ways to make this happen which are covered all over the forums and in the R5A? installation docs.
_________________
Have a question search the forum and have a look at the KnoppMythWiki.
Xsecrets |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
